[BSD] Nov 1 13:52:36 cassiopeia syslogd: exiting on signal 15

[Laszlo Nagy]

Gergő Szakál wrote:
> Szia!
>
> Ez kevés lesz. A következő patancsok kimenete érdekelne engem:
>
> uname -a
>   
FreeBSD cassiopeia.ronet 6.2-RELEASE-p7 FreeBSD 6.2-RELEASE-p7 #5: Wed 
Aug 29 14:18:01 EDT 2007 
gandalf at cassiopeia.ronet:/usr/obj/usr/src/sys/CASSIOPEIA  i386

> dmesg
>   
Picit hosszú lesz...

Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE-p7 #5: Wed Aug 29 14:18:01 EDT 2007
    gandalf at cassiopeia.ronet:/usr/obj/usr/src/sys/CASSIOPEIA
acpi_alloc_wakeup_handler: can't alloc wake memory
ACPI APIC Table: <A M I  OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) D CPU 3.00GHz (3010.67-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf62  Stepping = 2
  
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe43d<SSE3,RSVD2,MON,DS_CPL,VMX,CNTX-ID,CX16,<b14>,<b15>>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
real memory  = 3220832256 (3071 MB)
avail memory = 3150553088 (3004 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <A M I OEMXSDT> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci4: <ACPI PCI bus> on pcib1
pci4: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci2: <ACPI PCI bus> on pcib3
myk0: <Marvell 88E8053 Gigabit Ethernet Controller, Ver. 8.12.2.3> port 
0xc800-0xc8ff mem 0xcdefc000-0xcdefffff irq 19 at device 0.0 on pci2
myk0: Ethernet address: 00:17:31:c3:d2:fe
uhci0: <UHCI (generic) USB controller> port 0x8000-0x801f irq 20 at 
device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x8400-0x841f irq 17 at 
device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x8800-0x881f irq 18 at 
device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x9000-0x901f irq 19 at 
device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 
0xcdcff800-0xcdcffbff irq 20 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib4
pcm0: <CMedia CMI8738> port 0xb400-0xb4ff irq 21 at device 1.0 on pci1
rl0: <RealTek 8139 10/100BaseTX> port 0xb800-0xb8ff mem 
0xcddffc00-0xcddffcff irq 22 at device 2.0 on pci1
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:50:fc:8c:f6:62
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH7 SATA300 controller> port 
0xa800-0xa807,0xa400-0xa403,0xa000-0xa007,0x9800-0x9803,0x9400-0x940f 
mem 0xcdcffc00-0xcdcfffff irq 23 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 2.000 msec
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding 
disabled, default to deny, logging limited to 10 packets/entry by default
ad4: 190782MB <SAMSUNG SP2004C VM100-41> at ata2-master SATA150
GEOM_MIRROR: Device gm0 created (id=426713637).
GEOM_MIRROR: Device gm0: provider ad4 detected.
ad6: 190782MB <SAMSUNG SP2004C VM100-41> at ata3-master SATA150
GEOM_MIRROR: Device gm0: provider ad6 detected.
SMP: AP CPU #1 Launched!
GEOM_MIRROR: Device gm0: provider ad6 activated.
GEOM_MIRROR: Device gm0: provider ad4 activated.
GEOM_MIRROR: Device gm0: provider mirror/gm0 launched.
Trying to mount root from ufs:/dev/mirror/gm0s1a
myk0: link up
netsmb_dev: loaded
fuse4bsd: version 0.3.0, FUSE ABI 7.8
Warning: pid 1136 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 1315 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 1441 used static ldt allocation.
See the i386_set_ldt man page for more info
pid 1579 (esd), uid 1016: exited on signal 10
Warning: pid 1750 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 1776 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 2497 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 2932 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 3178 used static ldt allocation.
See the i386_set_ldt man page for more info