[BSD] [feczo at nmi.rulez.org: Freebsd 4.10 ncplogin + Netware 4.11 = nwerr 89fc]
Feczak Szabolcs
feczo at geek.hu
2004. Aug. 19., Cs, 12:48:49 CEST
Ha be akarok jelentkezni a netware szerverre, vagy
mountolni egy kotetet a kovetkezot kapom:
nwerr = 89fc, ami a kovetkezo forraskod szerint
http://debian.fapeal.br/debian/pool/main/n/ncpfs/ncpfs_2.2.0.18-10.diff
azt jelenti, hogy ismeretlen szerver (habar ez egy linux distribbol
vett forras, megis ugy gondolom a netware hibauzenetek tobbekevesbe
egyeznek, bar lehet hogy megsem). Ez fura, mivel az ipx config ugy
tunik rendben van, latoma szervert az ncplist-ben, es tudom is
pingelni ipxping-el. A bejelentkezeshez ugyanazokat az infokat
adom meg, mint win-en (user,tree,servername,password), ami egyebkent
muxik. lsd http://www.szabokft.hu/netware.jpg
Regebben mar sikerult fbsd alatt ipx-et, es ncpfs-t osszehozni,
igaz masik gepen, de ilyennel ott nem talalkoztam, szoval most
nezek mint borju az ujkapura.
Barkinek otlete van, szivesen vennem ... Itt van meg nemi
info ami segithet:
Novel Netware config:
File Server Name: SZABO-SERVER-BAJCSY
IPX Internal Network number: 37DC0000
Node Address: 000000000001
Frame Type: VIRTUAL_LAN
LAN protocol: IPX network 37DC0000
Compaq NetFlex-3 & Netelligent Ethernet HSM
Version 2.45 March 25, 1999
Hardware setting: Slot 10001, I/O ports 2c20h to 2c2fh, Interrupt Ah
Node Address: 00508BA0F270
Frame type: ETHERNET_802.2
Board Name: CPQNF3_1_E82
LAN protocol: IPX network 80200001
Compaq NetFlex-3 & Netelligent Ethernet HSM
Version 2.45 March 25, 1999
Hardware setting: Slot 10001, I/O ports 2c20h to 2c2fh, Interrupt Ah
Node Address: 00508BA0F270
Frame type: ETHERNET_802.3
Board Name: CPQNF3_1_E82
LAN protocol: IPX network 80300001
Freebsd konfiguracio, es a parancsok amikkel probalkoztam:
# ifconfig xl0f2
xl0f2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ipx 80200001H.a5e3efe20
inet6 fe80::20a:5eff:fe3e:fe20%xl0f2 prefixlen 64 scopeid 0xa
ether 00:0a:5e:3e:fe:20
# netstat -fipx -r
Routing tables
IPX:
Destination Gateway Flags Netif Expire
default 80200001.508ba0f27 UG xl0f2
80200001.* 80200001.a5e3efe20 U xl0f2
80300001.* 80200001.508ba0f27 UG xl0f2
# ncplist s
Visible servers (from SZABO-SERVER-BAJCSY):
Name Network Node Port
----------------------------------------------- -------- ------------ ----
SZABO-SERVER-BAJCSY 37DC0000:000000000001:0451
# ipxping -c 3 SZABO-SERVER-BAJCSY
Ping SZABO-SERVER-BAJCSY (37dc0000.1H.9086H): 8 data bytes
8 bytes received: seq=0 time=0.256 ms
8 bytes received: seq=1 time=0.233 ms
8 bytes received: seq=2 time=0.212 ms
--- SZABO-SERVER-BAJCSY ping statistics ---
3 packets sent, 3 received, 0% packets loss
round-trip min/avg/max = 0.212/0.234/0.256
# ncplogin -S SZABO-SERVER-BAJCSY -U user28 -T SZABO-SERVER-BAJCSY-TREE
Netware password:
ncplogin: Could not login to server SZABO-SERVER-BAJCSY: nwerr = 89fc
# uname -a
FreeBSD backup.sdi.hu 4.10-RELEASE-p2 FreeBSD 4.10-RELEASE-p2 #2: Wed Aug 18 20:08:14 CEST 2004 root at backup.sdi.hu:/mnt/data/obj/mnt/data/cvs/src/sys/BACKUP i386
# pkg_info| grep ncp
ncplib-1.3.4 Client for Novell NetWare servers
dmesg kimenete :
ACPI debug layer 0x0 debug level 0x0
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.10-RELEASE-p2 #2: Wed Aug 18 20:08:14 CEST 2004
root at backup.sdi.hu:/mnt/data/obj/mnt/data/cvs/src/sys/BACKUP
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1830014130 Hz
CPU: AMD Athlon(tm) XP 2500+ (1830.01-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x6a0 Stepping = 0
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory = 268369920 (262080K bytes)
avail memory = 256397312 (250388K bytes)
Preloaded elf kernel "kernel" at 0xc046c000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 11 entries at 0xc00fce20
acpi0: <Nvidia AWRDACPI> on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <unknown card> (vendor=0x10de, dev=0x01eb) at 0.1
pci0: <unknown card> (vendor=0x10de, dev=0x01ee) at 0.2
pci0: <unknown card> (vendor=0x10de, dev=0x01ed) at 0.3
pci0: <unknown card> (vendor=0x10de, dev=0x01ec) at 0.4
pci0: <unknown card> (vendor=0x10de, dev=0x01ef) at 0.5
isab0: <PCI to ISA bridge (vendor=10de device=0060)> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <unknown card> (vendor=0x10de, dev=0x0064) at 1.1 irq 5
ohci0: <OHCI (generic) USB controller> mem 0xe0003000-0xe0003fff irq 10 at device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xe0004000-0xe0004fff irq 11 at device 2.1 on pci0
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
pci0: <USB controller> at 2.2 irq 9
pci0: <unknown card> (vendor=0x10de, dev=0x006a) at 6.0 irq 5
pcib1: <PCI to PCI bridge (vendor=10de device=006c)> at device 8.0 on pci0
pci1: <PCI bus> on pcib1
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xc000-0xc07f mem 0xdf000000-0xdf00007f irq 11 at device 8.0 on pci1
xl0: reset didn't complete
xl0: Ethernet address: 00:0a:5e:3e:fe:20
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: <RealTek 8139 10/100BaseTX> port 0xc400-0xc4ff mem 0xdf001000-0xdf0010ff irq 11 at device 11.0 on pci1
rl0: Ethernet address: 00:0d:61:75:dc:e7
miibus1: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci0: <nVIDIA nForce2 ATA133 controller> port 0xf000-0xf00f at device 9.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pcib2: <PCI to PCI bridge (vendor=10de device=01e8)> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
pci2: <NVidia model 0181 graphics accelerator> at 0.0 irq 10
orm0: <Option ROMs> at iomem 0xc0000-0xcf7ff,0xd0000-0xd3fff,0xd4000-0xd47ff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ncp_load: [210-213]
ad0: 239371MB <Maxtor 7Y250P0> [486341/16/63] at ata0-master UDMA133
ad2: 239371MB <Maxtor 7Y250P0> [486341/16/63] at ata1-master UDMA133
Mounting root from ufs:/dev/ad0s1a
netsmb_dev: loaded
--
_(_)_
(_. o_) F3CZ0
(_,) http://feczo.nmi.rulez.org
( ) __________________________
// //
További információk a(z) BSD levelezőlistáról