[BSD] mpd, pptp

[Fairlane]

Nálam

FreeBSD 5.2.1
mpd 3.15

Esetleg valami router beallitas lehet a bunos?

Fairlane


Győrvári Gábor írta:

> amire akarok csatlakozni z egy router DMZ host mogotti gep
> ezert az IP cim 10.0.0.2
>
> eddig mukodik is es csatlakozas is megkezdodik, ennek ellenere nem lep 
> tovabb most sem
>
> FreeBSD 4.8
> mpd 3.18
>
> catlakozas meg WinXP SP1 es siman letrehoztam uj kapcsolatot es a 
> VPN-t valaszottam, a hitrelesites kodolasat nem modositottam
>
> su-2.05b# mpd
> Multi-link PPP for FreeBSD, by Archie L. Cobbs.
> Based on iij-ppp, by Toshiharu OHNO.
> mpd: pid 14494, version 3.18 (root at fDuskwood 19:39 21-Jan-2005)
> [pptp1] ppp node is "mpd14494-pptp1"
> mpd: local IP address for PPTP is 10.0.0.2
> [pptp1] using interface ng0
> [pptp1:pptp1] mpd: PPTP connection from 195.199.194.97:62805
> pptp0: attached to connection with 195.199.194.97:62805
> [pptp1] IFACE: Open event
> [pptp1] IPCP: Open event
> [pptp1] IPCP: state change Initial --> Starting
> [pptp1] IPCP: LayerStart
> [pptp1] IPCP: Open event
> [pptp1] bundle: OPEN event in state CLOSED
> [pptp1] opening link "pptp1"...
> [pptp1] link: OPEN event
> [pptp1] LCP: Open event
> [pptp1] LCP: state change Initial --> Starting
> [pptp1] LCP: LayerStart
> [pptp1] device: OPEN event in state DOWN
> [pptp1] attaching to peer's outgoing call
> [pptp1] device is now in state OPENING
> [pptp1] device: UP event in state OPENING
> [pptp1] device is now in state UP
> [pptp1] link: UP event
> [pptp1] link: origination is remote
> [pptp1] LCP: Up event
> [pptp1] LCP: state change Starting --> Req-Sent
> [pptp1] LCP: phase shift DEAD --> ESTABLISH
> [pptp1] LCP: SendConfigReq #1
>  ACFCOMP
>  PROTOCOMP
>  MRU 1500
>  MAGICNUM 3fd322d8
>  AUTHPROTO CHAP MSOFTv2
>  MP MRRU 1600
>  MP SHORTSEQ
>  ENDPOINTDISC [802.1] 00 10 4b 42 e4 db
> pptp0-0: ignoring SetLinkInfo
> [pptp1] LCP: rec'd Configure Request #0 link 0 (Req-Sent)
>  MRU 1400
>  MAGICNUM 4eec491d
>  PROTOCOMP
>  ACFCOMP
>  CALLBACK
>    Not supported
> [pptp1] LCP: SendConfigRej #0
>  CALLBACK
> [pptp1] LCP: SendConfigReq #2
>  ACFCOMP
>  PROTOCOMP
>  MRU 1500
>  MAGICNUM 3fd322d8
>  AUTHPROTO CHAP MSOFTv2
>  MP MRRU 1600
>  MP SHORTSEQ
>  ENDPOINTDISC [802.1] 00 10 4b 42 e4 db
> [pptp1] LCP: rec'd Configure Request #1 link 0 (Req-Sent)
>  MRU 1400
>  MAGICNUM 4eec491d
>  PROTOCOMP
>  ACFCOMP
>  CALLBACK
>    Not supported
> [pptp1] LCP: SendConfigRej #1
>  CALLBACK
> [pptp1] LCP: SendConfigReq #3
>  ACFCOMP
>
>
>