[BSD] mpd, pptp

[Fairlane]

Az mpd.links-ben javítsd ki az alabbi sort:

set pptp self 10.0.0.2

az alábbira:

set pptp self 10.0.0.8
(A mpd.conf-ban ezt adtad meg, ugyhogy itt is ennek illene lennie).

Üdv:
Fairlane

> Hali,
>
> Szeretnek VPN kapcsolatot csinalni albiban levo gepemmel, a kliens egy 
> WinXP lenne.
> Esetleg mas megoldas is erdekelne koszi
>
> A kovetkezo hibaval futok ossze es ez ismetlodik 5x aztan vege :((
>
> [pptp0] link: origination is remote
> [pptp0] LCP: Up event
> [pptp0] LCP: state change Starting --> Req-Sent
> [pptp0] LCP: phase shift DEAD --> ESTABLISH
> [pptp0] LCP: SendConfigReq #1
>  ACFCOMP
>  PROTOCOMP
>  MRU 1500
>  MAGICNUM 356529c3
>  AUTHPROTO CHAP MSOFTv2
> pptp0-0: ignoring SetLinkInfo
> [pptp0] LCP: rec'd Configure Request #0 link 0 (Req-Sent)
>  MRU 1400
>  MAGICNUM 31204729
>  PROTOCOMP
>  ACFCOMP
>  CALLBACK
>    Not supported
> [pptp0] LCP: SendConfigRej #0
>  CALLBACK
> [pptp0] LCP: SendConfigReq #2
>  ACFCOMP
>  PROTOCOMP
>  MRU 1500
>  MAGICNUM 356529c3
>  AUTHPROTO CHAP MSOFTv2
> [pptp0] LCP: rec'd Configure Request #1 link 0 (Req-Sent)
>
>
>------------------------------------------------------------------------
>
>default:
>    load pptp0
>    load pptp1
>
>pptp0:
>    new -i ng0 pptp0 pptp0
>    set ipcp ranges 10.0.0.8/32 10.0.0.69/30
>    load client_standard
>
>pptp1:
>    new -i ng1 pptp1 pptp1
>    set ipcp ranges 10.0.0.8/32 10.0.0.85/30
>    load client_standard
>
>client_standard:
>    set iface disable on-demand
>    set iface enable proxy-arp
>    set iface idle 0
>    set bundle disable multilink
>    set link yes acfcomp protocomp
>    set link no pap chap
>    set link enable chap
>    set link keep-alive 10 60
>    set link mtu 1460
>    set ipcp yes vjcomp
>    set ipcp nbns 192.168.1.2
>    set bundle enable compression
>    set ccp yes mppc
>    set ccp yes mpp-e40
>    set ccp yes mpp-e128
>    set ccp yes mpp-stateless
>    # set bundle yes crypt-reqd
>  
>
>------------------------------------------------------------------------
>
>pptp0:
>         set link type pptp
>         set pptp self 10.0.0.2
>         set pptp enable incoming
>         set pptp disable originate
>
>pptp1:
>         set link type pptp
>         set pptp self 10.0.0.2
>         set pptp enable incoming
>         set pptp disable originate
>  
>
>------------------------------------------------------------------------
>
>scr34m	1	*
>
>
>  
>
>------------------------------------------------------------------------
>
>_______________________________________________
>BSD levlista
>BSD at hu.freebsd.org
>http://www.hu.freebsd.org/hu/mailman/listinfo/bsd
>  
>