[BSD] Elado Compaq Professional Workstation AP550

[Robert Nagy]

A kovetkezo masina elado. Ar: 60e Pengo. A gephez tartozik
meg egy Matrox Millenium G2+ DualHead Videokartya is.
http://www.techzine.nl/f/s/1024.jpg
http://gksgmbh.info/fotos/110940428763_1_b.jpg

OpenBSD 3.8-current (GENERIC.MP) #29: Sat Dec  3 01:19:39 CET 2005 
     root at puffiana.humppa.be:/usr/src/sys/arch/i386/compile/GENERIC.MP 
 cpu0: Intel Pentium III ("GenuineIntel" 686-class) 864 MHz 
 cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE 
 real mem  = 1073324032 (1048168K) 
 avail mem = 972754944 (949956K) 
 using 4278 buffers containing 53768192 bytes (52508K) of memory 
 mainbus0 (root) 
 bios0 at mainbus0: AT/286+(15) BIOS, date 02/19/99, BIOS32 rev. 0 @ 0xec7e0 
 apm0 at bios0: Power Management spec V1.2 
 apm0: AC on, battery charge unknown 
 apm0: flags 30102 dobusy 0 doidle 1 
 pcibios0 at bios0: rev 2.1 @ 0xec7e0/0x3820 
 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf6c10/224 (12 entries) 
 pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801AA LPC" rev 0x00) 
 pcibios0: PCI bus #2 is the last bus 
 bios0: ROM list: 0xc0000/0xbc00 0xcbc00/0x1800 0xcd400/0x5e00 0xe0000/0x10000! 
 mainbus0: Intel MP Specification (Version 1.4) (COMPAQ   Workstation ) 
 cpu0 at mainbus0: apid 1 (boot processor) 
 cpu0: apic clock running at 132 MHz 
 cpu1 at mainbus0: apid 0 (application processor) 
 cpu1: Intel Pentium III ("GenuineIntel" 686-class) 864 MHz 
 cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE 
 mainbus0: bus 0 is type PCI    
 mainbus0: bus 1 is type PCI    
 mainbus0: bus 2 is type PCI    
 mainbus0: bus 9 is type ISA    
 ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins 
 ioapic0: misconfigured as apic 0, remapped to apic 8 
 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) 
 pchb0 at pci0 dev 0 function 0 "Intel 82840 Host" rev 0x02: rng active, 1478Kb/sec 
 ppb0 at pci0 dev 1 function 0 "Intel 82840 AGP" rev 0x02 
 pci1 at ppb0 bus 1 
 vga1 at pci1 dev 0 function 0 "Nvidia GeForce2 MX" rev 0xa1 
 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) 
 wsdisplay0: screen 1-5 added (80x25, vt100 emulation) 
 ppb1 at pci0 dev 30 function 0 "Intel 82801AA Hub-to-PCI" rev 0x02 
 pci2 at ppb1 bus 2 
 fxp0 at pci2 dev 2 function 0 "Intel 82557" rev 0x08, i82559: apic 8 int 18 (irq 11), address 00:02:a5:34:b9:c0 
 inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4 
 ahc0 at pci2 dev 7 function 0 "Adaptec AIC-7892 U160" rev 0x02: apic 8 int 19 (irq 11) 
 scsibus0 at ahc0: 16 targets 
 sd0 at scsibus0 targ 0 lun 0: <COMPAQPC, DDYS-T09170N, B96H> SCSI2 0/direct fixed 
 sd0: 8678MB, 5273 cyl, 20 head, 168 sec, 512 bytes/sec, 17773524 sec total 
 ichpcib0 at pci0 dev 31 function 0 "Intel 82801AA LPC" rev 0x02 
 pciide0 at pci0 dev 31 function 1 "Intel 82801AA IDE" rev 0x02: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility 
 pciide0: channel 0 disabled (no drives) 
 atapiscsi0 at pciide0 channel 1 drive 0 
 scsibus1 at atapiscsi0: 2 targets 
 cd0 at scsibus1 targ 0 lun 0: <COMPAQ, CD-ROM CRD-8402B, 1.05> SCSI0 5/cdrom removable 
 cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 
 uhci0 at pci0 dev 31 function 2 "Intel 82801AA USB" rev 0x02: apic 8 int 19 (irq 11) 
 usb0 at uhci0: USB revision 1.0 
 uhub0 at usb0 
 uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 
 uhub0: 2 ports with 2 removable, self powered 
 "Intel 82801AA SMBus" rev 0x02 at pci0 dev 31 function 3 not configured 
 auich0 at pci0 dev 31 function 5 "Intel 82801AA AC97" rev 0x02: apic 8 int 17 (irq 11), ICH AC97 
 ac97: codec id 0x41445340 (Analog Devices AD1881) 
 ac97: codec features headphone, Analog Devices Phat Stereo 
 audio0 at auich0 
 isa0 at ichpcib0 
 isadma0 at isa0 
 pckbc0 at isa0 port 0x60/5 
 pckbd0 at pckbc0 (kbd slot) 
 pckbc0: using irq 1 for kbd slot 
 wskbd0 at pckbd0: console keyboard, using wsdisplay0 
 pcppi0 at isa0 port 0x61 
 midi0 at pcppi0: <PC speaker> 
 spkr0 at pcppi0 
 sysbeep0 at pcppi0 
 lpt0 at isa0 port 0x378/4 irq 7 
 npx0 at isa0 port 0xf0/16: using exception 16 
 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo 
 pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo 
 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 
 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec 
 biomask 0 netmask 0 ttymask 0 
 ioapic0: pin 17 shares different IPL interrupts (50..90), degraded performance 
 ioapic0: pin 18 shares different IPL interrupts (40..50), degraded performance 
 pctr: 686-class user-level performance counters enabled 
 mtrr: Pentium Pro MTRR support 
 apm0: disconnected 
 uhidev0 at uhub0 port 2 configuration 1 interface 0 
 uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1 
 ums0 at uhidev0: 3 buttons and Z dir. 
 wsmouse0 at ums0 mux 0 
 ahc0: target 0 using 16bit transfers 
 ahc0: target 0 synchronous at 80.0MHz DT, offset = 0x3f 
 dkcsum: sd0 matches BIOS drive 0x80 
 root on sd0a 
 rootdev=0x400 rrootdev=0xd00 rawdev=0xd02