[BSD] /dev/fd0 hianyzik
Levus
levus-bsd at freemail.hu
2004. Már. 11., Cs, 10:56:48 CET
Szia!
Saját véleményem szerint egy kicsit sok túl kernelt fordítottam már ilyen
rövid idő alatt, viszont GENERIC kernelnél sincs fd0.
Egy most érkezett másik javaslat alapján acpi disabled-el indítottam a gépet
akkor megjelenik az fd0, sőt használni is tudom. Ez bug vagy feature? Windows
alatt működik, és Linux alatt is volt floppy, de ezt most nem tudom
kipróbálni.
Ehez kapcsolódóan kérdezem mit veszítek, ha az acpi nélkül megy a gép, és
hogyan lehet az acpi disabled indítási módot default-á tenni.
Mellékelten küldöm a dmesg kimenetét és a saját kernel config fájlt, hátha ez
segít abban, hogy acpi-vel is legyen fd0.
Köszi
On Thursday 11 March 2004 07.22, Ádám Csongor wrote:
> Az 5-os FBSD-kben az eszkozok automatikusan generalodnak. Van ket hulye
> kerdesem: Forditottal uj kernelt, vagy a GENERIC fut? masik: tudsz
> kuldeni egy dmesg-et? Ha forditottal kernelt akkor a kernel
> konfiguracios fajlja is jol jonne. Utolso huloye kerdes: amugy a floppy
> meghajto mas rendszer alatt mukodik?
-
LEVAY, Laszlo (FreeBSD)
xconsole:
duri# lf /dev | grep -i fd
fd/
duri# dmesg
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RC #2: Thu Mar 11 06:40:29 CET 2004
root at duri.freebsd:/usr/src/sys/i386/compile/DURIKERNEL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc08b2000.
Preloaded elf module "/boot/kernel/radeon.ko" at 0xc08b226c.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08b2318.
module_register: module pci/DRIVER_NAME already exists!
Module pci/DRIVER_NAME failed to register: 17
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) Processor (1327.69-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x644 Stepping = 4
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
real memory = 536805376 (511 MB)
avail memory = 511770624 (488 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AMIINT SiS735XX> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00f7760
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 2 INTD is routed to irq 12
pcib0: slot 2 INTA is routed to irq 5
pcib0: slot 2 INTC is routed to irq 11
pcib0: slot 11 INTA is routed to irq 5
pcib0: slot 15 INTA is routed to irq 12
agp0: <SIS Generic host to PCI bridge> mem 0xd0000000-0xd3ffffff at device 0.0
on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci1: <display> at device 0.1 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xcfffe000-0xcfffefff irq 12 at device
2.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
ohci1: <SiS 5571 USB controller> mem 0xcffff000-0xcfffffff irq 5 at device 2.3
on pci0
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ugen0: Logitech Inc. WingMan Force 3D, rev 1.00/1.06, addr 2
atapci0: <SiS 735 UDMA100 controller> port 0xff00-0xff0f at device 2.5 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pcm0: <SiS 7012> port 0xd800-0xd83f,0xdc00-0xdcff irq 11 at device 2.7 on pci0
pcm0: <Realtek ALC100 AC97 Codec>
fwohci0: <Texas Instruments TSB12LV23> mem
0xcfff8000-0xcfffbfff,0xcfffc800-0xcfffcfff irq 5 at device 11.0 on pci0
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:30:8d:01:00:01:00:85
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:30:8d:01:00:85
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
dc0: <Intel 21143 10/100BaseTX> port 0xd400-0xd47f mem 0xcfffdc00-0xcfffdfff
irq 12 at device 15.0 on pci0
dc0: Ethernet address: 00:40:f4:24:68:ce
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
acpi_button0: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: cmd 3 failed at out byte 1 of 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
fdc0: cmd 3 failed at out byte 1 of 3
orm0: <Option ROM> at iomem 0xc0000-0xcafff on isa0
pmtimer0 on isa0
fdc0: cannot reserve I/O port range (6 ports)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1327692720 Hz quality 800
Timecounters tick every 10.000 msec
ata0-master: DMA limited to UDMA33, non-ATA66 cable or device
GEOM: create disk ad0 dp=0xc491e660
ad0: 38166MB <ST340016A> [77545/16/63] at ata0-master UDMA33
acd0: DVDROM <TOSHIBA DVD-ROM SD-M1202> at ata1-master PIO4
acd1: CDRW <ASUS CRW-1610A> at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s2a
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks, buffers remaining... 7 7
done
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RC #0: Sat Jan 31 05:36:22 GMT 2004
root at cypress.btc.adpatec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel.install/kernel" at 0xc0a51000.
Preloaded elf module "/boot/kernel.install/radeon.ko" at 0xc0a51274.
Preloaded elf module "/boot/kernel.install/acpi.ko" at 0xc0a51328.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) Processor (1327.69-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x644 Stepping = 4
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
real memory = 536805376 (511 MB)
avail memory = 511762432 (488 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AMIINT SiS735XX> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00f7760
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 2 INTD is routed to irq 12
pcib0: slot 2 INTA is routed to irq 5
pcib0: slot 2 INTC is routed to irq 11
pcib0: slot 11 INTA is routed to irq 5
pcib0: slot 15 INTA is routed to irq 12
agp0: <SIS Generic host to PCI bridge> mem 0xd0000000-0xd3ffffff at device 0.0
on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci1: <display> at device 0.1 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xcfffe000-0xcfffefff irq 12 at device
2.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
ohci1: <SiS 5571 USB controller> mem 0xcffff000-0xcfffffff irq 5 at device 2.3
on pci0
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ugen0: Logitech Inc. WingMan Force 3D, rev 1.00/1.06, addr 2
atapci0: <SiS 735 UDMA100 controller> port 0xff00-0xff0f at device 2.5 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <multimedia, audio> at device 2.7 (no driver attached)
fwohci0: <Texas Instruments TSB12LV23> mem
0xcfff8000-0xcfffbfff,0xcfffc800-0xcfffcfff irq 5 at device 11.0 on pci0
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:30:8d:01:00:01:00:85
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:30:8d:01:00:85
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
dc0: <Intel 21143 10/100BaseTX> port 0xd400-0xd47f mem 0xcfffdc00-0xcfffdfff
irq 12 at device 15.0 on pci0
dc0: Ethernet address: 00:40:f4:24:68:ce
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
acpi_button0: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: cmd 3 failed at out byte 1 of 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
fdc0: cmd 3 failed at out byte 1 of 3
orm0: <Option ROM> at iomem 0xc0000-0xcafff on isa0
pmtimer0 on isa0
fdc0: cannot reserve I/O port range (6 ports)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1327691860 Hz quality 800
Timecounters tick every 10.000 msec
ata0-master: DMA limited to UDMA33, non-ATA66 cable or device
GEOM: create disk ad0 dp=0xc493b760
ad0: 38166MB <ST340016A> [77545/16/63] at ata0-master UDMA33
acd0: DVDROM <TOSHIBA DVD-ROM SD-M1202> at ata1-master PIO4
acd1: CDRW <ASUS CRW-1610A> at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s2a
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks, buffers remaining... 1 1
done
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RC #2: Thu Mar 11 06:40:29 CET 2004
root at duri.freebsd:/usr/src/sys/i386/compile/DURIKERNEL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0860000.
Preloaded elf module "/boot/kernel/radeon.ko" at 0xc086026c.
module_register: module pci/DRIVER_NAME already exists!
Module pci/DRIVER_NAME failed to register: 17
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) Processor (1327.69-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x644 Stepping = 4
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
real memory = 536805376 (511 MB)
avail memory = 511778816 (488 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00f7760
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci_cfgintr: 0:2 INTD BIOS irq 12
pci_cfgintr: 0:2 INTA BIOS irq 5
pci_cfgintr: 0:2 INTC BIOS irq 11
pci_cfgintr: 0:11 INTA BIOS irq 5
pci_cfgintr: 0:15 INTA BIOS irq 12
agp0: <SIS Generic host to PCI bridge> mem 0xd0000000-0xd3ffffff at device 0.0
on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci1: <display> at device 0.1 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xcfffe000-0xcfffefff irq 12 at device
2.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
ohci1: <SiS 5571 USB controller> mem 0xcffff000-0xcfffffff irq 5 at device 2.3
on pci0
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ugen0: Logitech Inc. WingMan Force 3D, rev 1.00/1.06, addr 2
atapci0: <SiS 735 UDMA100 controller> port 0xff00-0xff0f at device 2.5 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pcm0: <SiS 7012> port 0xd800-0xd83f,0xdc00-0xdcff irq 11 at device 2.7 on pci0
pcm0: <Realtek ALC100 AC97 Codec>
fwohci0: <Texas Instruments TSB12LV23> mem
0xcfff8000-0xcfffbfff,0xcfffc800-0xcfffcfff irq 5 at device 11.0 on pci0
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:30:8d:01:00:01:00:85
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:30:8d:01:00:85
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
dc0: <Intel 21143 10/100BaseTX> port 0xd400-0xd47f mem 0xcfffdc00-0xcfffdfff
irq 12 at device 15.0 on pci0
dc0: Ethernet address: 00:40:f4:24:68:ce
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROM> at iomem 0xc0000-0xcafff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
Timecounter "TSC" frequency 1327692327 Hz quality 800
Timecounters tick every 10.000 msec
ata0-master: DMA limited to UDMA33, non-ATA66 cable or device
GEOM: create disk ad0 dp=0xc49b2560
ad0: 38166MB <ST340016A> [77545/16/63] at ata0-master UDMA33
acd0: DVDROM <TOSHIBA DVD-ROM SD-M1202> at ata1-master PIO4
acd1: CDRW <ASUS CRW-1610A> at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s2a
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks, buffers remaining... 7 7
done
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RC #2: Thu Mar 11 06:40:29 CET 2004
root at duri.freebsd:/usr/src/sys/i386/compile/DURIKERNEL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc08b2000.
Preloaded elf module "/boot/kernel/radeon.ko" at 0xc08b226c.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08b2318.
module_register: module pci/DRIVER_NAME already exists!
Module pci/DRIVER_NAME failed to register: 17
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) Processor (1327.69-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x644 Stepping = 4
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
real memory = 536805376 (511 MB)
avail memory = 511770624 (488 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AMIINT SiS735XX> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00f7760
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 2 INTD is routed to irq 12
pcib0: slot 2 INTA is routed to irq 5
pcib0: slot 2 INTC is routed to irq 11
pcib0: slot 11 INTA is routed to irq 5
pcib0: slot 15 INTA is routed to irq 12
agp0: <SIS Generic host to PCI bridge> mem 0xd0000000-0xd3ffffff at device 0.0
on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci1: <display> at device 0.1 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xcfffe000-0xcfffefff irq 12 at device
2.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
ohci1: <SiS 5571 USB controller> mem 0xcffff000-0xcfffffff irq 5 at device 2.3
on pci0
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ugen0: Logitech Inc. WingMan Force 3D, rev 1.00/1.06, addr 2
atapci0: <SiS 735 UDMA100 controller> port 0xff00-0xff0f at device 2.5 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pcm0: <SiS 7012> port 0xd800-0xd83f,0xdc00-0xdcff irq 11 at device 2.7 on pci0
pcm0: <Realtek ALC100 AC97 Codec>
fwohci0: <Texas Instruments TSB12LV23> mem
0xcfff8000-0xcfffbfff,0xcfffc800-0xcfffcfff irq 5 at device 11.0 on pci0
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:30:8d:01:00:01:00:85
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:30:8d:01:00:85
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
dc0: <Intel 21143 10/100BaseTX> port 0xd400-0xd47f mem 0xcfffdc00-0xcfffdfff
irq 12 at device 15.0 on pci0
dc0: Ethernet address: 00:40:f4:24:68:ce
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
acpi_button0: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: cmd 3 failed at out byte 1 of 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
fdc0: cmd 3 failed at out byte 1 of 3
orm0: <Option ROM> at iomem 0xc0000-0xcafff on isa0
pmtimer0 on isa0
fdc0: cannot reserve I/O port range (6 ports)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1327692933 Hz quality 800
Timecounters tick every 10.000 msec
ata0-master: DMA limited to UDMA33, non-ATA66 cable or device
GEOM: create disk ad0 dp=0xc491e660
ad0: 38166MB <ST340016A> [77545/16/63] at ata0-master UDMA33
acd0: DVDROM <TOSHIBA DVD-ROM SD-M1202> at ata1-master PIO4
acd1: CDRW <ASUS CRW-1610A> at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s2a
duri#
MYKERNEL:
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.394.2.3 2004/01/26 19:42:11 nectar
Exp $
machine i386
#L cpu I486_CPU
#L cpu I586_CPU
cpu I686_CPU
ident DURIKERNEL #L GENERIC
#To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" #Default places to look for devices.
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
options SCHED_4BSD #4BSD scheduler
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options SOFTUPDATES #Enable FFS soft updates support
options UFS_ACL #Support for access control lists
options UFS_DIRHASH #Improve performance on big directories
options MD_ROOT #MD is a potential root device
options NFSCLIENT #Network Filesystem Client
options NFSSERVER #Network Filesystem Server
options NFS_ROOT #NFS usable as /, requires NFSCLIENT
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options PROCFS #Process filesystem (requires PSEUDOFS)
options PSEUDOFS #Pseudo-filesystem framework
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 #Compatible with FreeBSD4
options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
options PFIL_HOOKS # pfil(9) framework
# Debugging for use in -current
#options DDB #Enable the kernel debugger
#options INVARIANTS #Enable calls of extra sanity checking
options INVARIANT_SUPPORT #Extra sanity checks of internal structures,
required by INVARIANTS
#options WITNESS #Enable checks to detect deadlocks and cycles
#options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed
# To make an SMP kernel, the next two are needed
options SMP # Symmetric MultiProcessor Kernel
device apic # I/O APIC
device isa
device eisa
device pci
device agp # support several AGP chipsets
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
#L device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
# SCSI Controllers
#L device ahb # EISA AHA1742 family
#L device ahc # AHA2940 and onboard AIC7xxx devices
#L device ahd # AHA39320/29320 and onboard AIC79xx devices
#L device amd # AMD 53C974 (Tekram DC-390(T))
#L device isp # Qlogic family
#L device mpt # LSI-Logic MPT-Fusion
#device ncr # NCR/Symbios Logic
#L device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
#L device trm # Tekram DC395U/UW/F DC315U adapters
#L device adv # Advansys SCSI adapters
#L device adw # Advansys wide SCSI adapters
#L device aha # Adaptec 154x SCSI adapters
#L device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
#L device bt # Buslogic/Mylex MultiMaster SCSI adapters
#L device ncv # NCR 53C500
#L device nsp # Workbit Ninja SCSI-3
#L device stg # TMC 18C30/18C50
# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
#L device ch # SCSI media changers
device da # Direct Access (disks)
#L device sa # Sequential Access (tape etc)
#L device cd # CD
#L device pass # Passthrough device (direct SCSI access)
#L device ses # SCSI Environmental Services (and SAF-TE)
# RAID controllers interfaced to the SCSI subsystem
#L device amr # AMI MegaRAID
#L device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
#L device ciss # Compaq Smart RAID 5*
#L device dpt # DPT Smartcache III, IV - See NOTES for options
#L device iir # Intel Integrated RAID
#L device ips # IBM (Adaptec) ServeRAID
#L device mly # Mylex AcceleRAID/eXtremeRAID
# RAID controllers
#L device aac # Adaptec FSA RAID
#L device aacp # SCSI passthrough for aac (requires CAM)
#L device ida # Compaq Smart RAID
#L device mlx # Mylex DAC960 family
#L device pst # Promise Supertrak SX6000
#L device twe # 3ware ATA RAID
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
# Enable this for the pcvt (VT220 compatible) console driver
#device vt
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
# Floating point support - do not disable.
device npx #L Mandatory
# Power management support (see NOTES for more options)
#L device apm # uncomment by L
# Add suspend/resume support for the i8254.
device pmtimer
# PCCARD (PCMCIA) support
# Pcmcia and cardbus bridge support
#L device cbb # cardbus (yenta) bridge
#device pcic # ExCA ISA and PCI bridges
#L device pccard # PC Card (16-bit) bus
#L device cardbus # CardBus (32-bit) bus
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to the sio and/or ppc drivers):
#device puc
# PCI Ethernet NICs.
device de # DEC/Intel DC21x4x (``Tulip'')
#L device em # Intel PRO/1000 adapter Gigabit Ethernet Card
#L device txp # 3Com 3cR990 (``Typhoon'')
#L device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
#L device bfe # Broadcom BCM440x 10/100 ethernet
#L device bge # Broadcom BCM570xx Gigabit Ethernet
device dc # DEC/Intel 21143 and various workalikes
#L device fxp # Intel EtherExpress PRO/100B (82557, 82558)
#L device pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc')
#L device re # RealTek 8139C+/8169/8169S/8110S
#L device rl # RealTek 8129/8139
#L device sf # Adaptec AIC-6915 (``Starfire'')
device sis # Silicon Integrated Systems SiS 900/SiS 7016
#L device sk # SysKonnect SK-984x and SK-982x gigabit ethernet
#L device ste # Sundance ST201 (D-Link DFE-550TX)
#L device ti # Alteon Networks Tigon I/II gigabit ethernet
#L device tl # Texas Instruments ThunderLAN
#L device tx # SMC EtherPower II (83c170 ``EPIC'')
#L device vr # VIA Rhine, Rhine II
#L device wb # Winbond W89C840F
#L device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# ISA Ethernet NICs. pccard nics included.
#L device cs # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
#L device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
#L device ex # Intel EtherExpress Pro/10 and Pro/10+
#L device ep # Etherlink III based cards
#L device fe # Fujitsu MB8696x based cards
#L device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc.
#L device lnc # NE2100, NE32-VL Lance Ethernet cards
#L device sn # SMC's 9000 series of ethernet chips
#L device xe # Xircom pccard ethernet
# ISA devices that use the old ISA shims
#device le
# Wireless NIC cards
#L device wlan # 802.11 support
#L device an # Aironet 4500/4800 802.11 wireless NICs.
#L device awi # BayStack 660 and others
#L device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device wl # Older non 802.11 Wavelan wireless NIC.
# Pseudo devices - the number indicates how many units to allocate.
device random # Entropy device
device loop # Network loopback #L Mandatory
device ether # Ethernet support
device sl # Kernel SLIP
device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device ugen # Generic
device uhid # "Human Interface Devices"
#L device ukbd # Keyboard
#L device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
#L device urio # Diamond Rio 500 MP3 player
#L device uscanner # Scanners
# USB Ethernet, requires mii
#L device aue # ADMtek USB ethernet
#L device axe # ASIX Electronics USB ethernet
#L device cue # CATC USB ethernet
#L device kue # Kawasaki LSI USB ethernet
# FireWire support
device firewire # FireWire bus code
#L device sbp # SCSI over FireWire (Requires scbus and da)
device fwe # Ethernet over FireWire (non-standard!)
#L Sound card
device pcm #L added for PnP ISA or PCI cards
device midi #L
device seq #L
device sbc #L
#L ATI Radeon 9200, 128MB
device radeondrm #L
____________________________________________________________________
Miert fizetsz az internetert? Korlatlan, ingyenes internet hozzaferes a FreeStarttol.
Probald ki most! http://www.freestart.hu
További információk a(z) BSD levelezőlistáról