[BSD] Pen drive FreeBSD-vel

[Zahemszky Gábor]

Sziasztok! 

Lett egy ilyenem (256M-s), és kicsit meg vagyok l?ve. current alatt ugyanis 
a következ?t látom, amikor a (tökéletesen? és automatikusan felismert) da0 
eszközt megnézem: 

$ fdisk da0
******* Working on device /dev/da0 *******
parameters extracted from in-core disklabel are:
cylinders=250 heads=64 sectors/track=32 (2048 blks/cyl) 

parameters to be used for BIOS calculations are:
cylinders=250 heads=64 sectors/track=32 (2048 blks/cyl) 

Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 32 (0x20),(unknown)
   start 1919950958, size 544437093 (265838 Meg), flag 20
       beg: cyl 356/ head 97/ sector 46;
       end: cyl 357/ head 116/ sector 40
The data for partition 2 is:
sysid 107 (0x6b),(unknown)
   start 1330184202, size 538976288 (263172 Meg), flag 61
       beg: cyl 288/ head 110/ sector 57;
       end: cyl 269/ head 101/ sector 57
The data for partition 3 is:
sysid 83 (0x53),(DM6 Aux3)
   start 538989391, size 1398362912 (682794 Meg), flag 20
       beg: cyl 345/ head 32/ sector 19;
       end: cyl 324/ head 77/ sector 19
The data for partition 4 is:
sysid 73 (0x49),(unknown)
   start 1394627663, size 21337 (10 Meg), flag 80 (active)
       beg: cyl 87/ head 1/ sector 0;
       end: cyl 335/ head 78/ sector 2
$ 

Azaz nem jó egyik partíció mérete sem, a tipusáról nem is beszélve. Úgy 
gondolom ezeket a ketyeréket nem kell se formázni, se fdisk-elni. Nade 
ekkor? Amúgy a kernel ezt állítja róla:
uhub1: Prolific Technology Inc. USB_HUB, class 9/0, rev 2.00/0.01, addr 2
uhub1: 1 port with 0 removable, self powered
umass0: Prolific Technology Inc. USB_Storage, rev 2.00/0.01, addr 3
GEOM: create disk da0 dp=0xc18d2c50
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Prolific UsbFlashDisk PROL> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: 250MB (512000 512 byte sectors: 64H 32S/T 250C) 

Szóval? 

Zahy < Gabor at Zahemszky dot HU >