[BSD] Buslogic hiba

[rhiannon]

Sziasztok!

Van egy masinam amire fel szerettem volna rakni a 4.8-as freebsd-t. Fel
is ment, de van egy hiba ami kb. 5 percenkent elojon.

(da0:bt0:0:4:0): CCB 0xd9cde700 - timed out
panic: bt0: btreset - Diagnostic Active failed to drop. status = 0x80

syncing disk ...

dmesg:
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE #0: Thu Apr  3 10:53:38 GMT 2003
    root at freebsd-stable.sentex.ca:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254"  frequency 1193182 Hz
CPU: AMD Duron(tm) processor (750.03-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x631  Stepping = 1
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
  AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
real memory  = 536805376 (524224K bytes)
avail memory = 517070848 (504952K bytes)
Preloaded elf kernel "kernel" at 0xc051d000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 9 entries at 0xc00fdee0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <VIA 8363 (Apollo KT133) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xd000-0xd00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 10 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 10 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 7.4
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xdc00-0xdc7f mem 0xe5810000-0xe581007f irq 10 at device 11.0 on pci0
xl0: Ethernet address: 00:01:02:99:a2:dc
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bt0: <Buslogic Multi-Master SCSI Host Adapter> port 0xe000-0xe003 irq 11 at device 15.0 on pci0
bt0: BT-956C FW Rev. 4.26B Wide SCSI Host Adapter, SCSI ID 7, 100 CCBs
pci0: <SiS 6326 SVGA controller> at 17.0 irq 12
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcc7ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 3079MB <QUANTUM FIREBALL EX3.2A> [6256/16/63] at ata0-master UDMA33
acd0: CD-RW <HL-DT-ST RW/DVD GCC-4320B> at ata0-slave PIO4
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0s1a
da0 at bt0 bus 0 target 4 lun 0
da0: <QUANTUM ATLAS IV 9 WLS 0B0B> Fixed Direct Access SCSI-3 device 
da0: 20.000MB/s transfers (10.000MHz, offset 14, 16bit), Tagged Queueing Enabled
da0: 8761MB (17942584 512 byte sectors: 255H 63S/T 1116C)

uname -a:
FreeBSD katmandu.data-port 4.8-RELEASE FreeBSD 4.8-RELEASE #0: Thu Apr  3 10:53:38 GMT 2003     
root at freebsd-stable.sentex.ca:/usr/obj/usr/src/sys/GENERIC  i386

Mi lehet a baj?

Zsolt