[FreeBSD] DTK alaplapon AC97

[Zsolt Kuti]

On Mon, 4 Feb 2002 14:54:44 +0100
Peter Hollaubek <fifteen at inext.hu> wrote:

> On Mon, 4 Feb 2002 11:55:26 +0100
> Zsolt Kuti <kuti at cetelem.hu> wrote:
> 
> > Sziasztok!
> > 
> > Ebbol a joszagbol szeretnek hangot csiholni, de nem megy.
> > Probaltam kezzel betolteni pcm-et es mindenfele kombinacioban az
> > snd_xx modulokat, beleforditottam a kernelbe, csereltem a PCI sloton
> > ulo egyeb kartyakat. Semmi.
> > 
> > A neten sem talaltam semmi ertelmeset.
> > Van valami tippetek meg azon kivul, hogy vehetek hangkartyat?

 
> szia,
> 
> pciconf -lv
> 
> itt ilyen, es muxik minden gond nelkul:
> pcm0 at pci0:31:5: class=0x040100 card=0x4710414c chip=0x24458086
> rev=0x11 hdr=0x00    vendor   = 'Intel Corporation'
>     device   = '82801BA/BAM (ICH2) AC'97 Audio Controller'
>     class    = multimedia
>     subclass = audio
> 
> csak pcm-et forgattam kernelbe:
> device          pcm
> 
> dmesg:
> pcm0: <Intel 82801BA (ICH2)> port 0xdc00-0xdc3f,0xd800-0xd8ff irq 12
> at device 31.5 on pci0
> 
> sndstat:
> FreeBSD Audio Driver (newpcm) Jan 29 2002 17:05:44
> Installed devices:
> pcm0: <Intel 82801BA (ICH2)> at io 0xd800, 0xdc00 irq 12 (1p/2r/0v
> channels duplex)

Szia!

Ennek nagyon orulok ;)

Es az enyem?
Nalam eloszor is:
pciconf -lv
pciconf: illegal option -- v
usage: pciconf -l
       pciconf -a sel
       pciconf -r [-b | -h] sel addr[:addr]
       pciconf -w [-b | -h] sel addr [value]

Aztan meg:
 pciconf -l
chip0 at pci0:0:0: class=0x060000 card=0x00000000 chip=0x30991106 rev=0x00
hdr=0x00 pcib1 at pci0:1:0: class=0x060400 card=0x00000080 chip=0xb0991106
rev=0x00 hdr=0x01 xl0 at pci0:7:0:   class=0x020000 card=0x100010b7
chip=0x920010b7 rev=0x78 hdr=0x00 isab0 at pci0:17:0:        class=0x060100
card=0x30741106 chip=0x30741106 rev=0x00 hdr=0x00 atapci0 at pci0:17:1:    
 class=0x01018a card=0x05711106 chip=0x05711106 rev=0x06 hdr=0x00
uhci0 at pci0:17:2:        class=0x0c0300 card=0x12340925 chip=0x30381106
rev=0x18 hdr=0x00 uhci1 at pci0:17:3:        class=0x0c0300 card=0x12340925
chip=0x30381106 rev=0x18 hdr=0x00 uhci2 at pci0:17:4:        class=0x0c0300
card=0x12340925 chip=0x30381106 rev=0x18 hdr=0x00 none0 at pci0:17:5:      
 class=0x040100 card=0x38001462 chip=0x30591106 rev=0x10 hdr=0x00
none1 at pci1:0:0: class=0x030000 card=0x00081002 chip=0x474d1002 rev=0x27
hdr=0x00

Nalam nem latszik pcm0, van viszont ket "none"...
Azt irja a a man:
"If there is no device configured in the kernel for the PCI device in
question, the device name will be ``none''". Persze nalam is benne van a
kernelben a  "device pcm". Gondoltam, miutan PCI-osnak kene latszania, a
halokartyat atrakom masik slotba, de ez sem segitett. Lehet, hogy meg
mindig valahol utkozik? De mit kene cserelgetnem es hova, ha egyaltalan
...? Kell esetleg valami a BIOS-ban is allitani?

Zs