DTK alaplapon AC97

[Zsolt Kuti]

Sziasztok!

Ebbol a joszagbol szeretnek hangot csiholni, de nem megy.
Probaltam kezzel betolteni pcm-et es mindenfele kombinacioban az snd_xx
modulokat, beleforditottam a kernelbe, csereltem a PCI sloton ulo egyeb
kartyakat. Semmi.

A neten sem talaltam semmi ertelmeset.
Van valami tippetek meg azon kivul, hogy vehetek hangkartyat?

Zsolt


$ cat /dev/sndstat
FreeBSD Audio Driver (newpcm) Feb  1 2002 15:28:02
Installed devices:

My dmesg:
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights
reserved. FreeBSD 4.4-RELEASE #1: Fri Feb  1 15:28:04 CET 2002
    root at kuti:/usr/src/sys/compile/TINCA
Timecounter "i8254"  frequency 1193182 Hz
CPU: AMD Athlon(tm) Processor (1399.76-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x644  Stepping = 4
 
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,
CMOV,PA T,PSE36,MMX,FXSR>
  AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory  = 268369920 (262080K bytes)
avail memory = 256303104 (250296K bytes)
Preloaded elf kernel "kernel" at 0xc04eb000.
Preloaded elf module "libmchain.ko" at 0xc04eb09c.
Preloaded elf module "smbfs.ko" at 0xc04eb140.
netsmb_dev: loaded
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 10 entries at 0xc00f7df0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1106 device=b099)> at device 1.0 on
pci0 pci1: <PCI bus> on pcib1
pci1: <ATI Mach64-GM graphics accelerator> at 0.0 irq 11
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd800-0xd87f mem
0xdfffff80-0xdfff ffff irq 10 at device 7.0 on pci0
xl0: Ethernet address: 00:04:76:25:79:44
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI to ISA bridge (vendor=1106 device=3074)> at device 17.0 on
pci0 isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xff00-0xff0f at device
17.1 on pci 0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 5 at device
17.2 on pc i0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 5 at device
17.3 on pc i0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 5 at device
17.4 on pc i0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x1106, dev=0x3059) at 17.5 irq 10
orm0: <Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xc87ff,0xc8800-0xcbfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0 fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0 sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: IEEE1284 device found /NIBBLE
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard HP LaserJet 6L/0101.01> PRINTER HP ENHANCED
PCL5,PJL plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 28629MB <QUANTUM FIREBALLP AS30.0> [58168/16/63] at ata0-master
UDMA100 acd0: CDROM <LG CD-ROM CRD-8521B> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s1a