[FreeBSD] DTK alaplapon AC97

2002. Feb. 4., H, 14:54:44 CET

On Mon, 4 Feb 2002 11:55:26 +0100
Zsolt Kuti <kuti at cetelem.hu> wrote:

> Sziasztok!
> 
> Ebbol a joszagbol szeretnek hangot csiholni, de nem megy.
> Probaltam kezzel betolteni pcm-et es mindenfele kombinacioban az snd_xx
> modulokat, beleforditottam a kernelbe, csereltem a PCI sloton ulo egyeb
> kartyakat. Semmi.
> 
> A neten sem talaltam semmi ertelmeset.
> Van valami tippetek meg azon kivul, hogy vehetek hangkartyat?
> 
> Zsolt
> 
> 
> $ cat /dev/sndstat
> FreeBSD Audio Driver (newpcm) Feb  1 2002 15:28:02
> Installed devices:
> 
> My dmesg:
> Copyright (c) 1992-2001 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights
> reserved. FreeBSD 4.4-RELEASE #1: Fri Feb  1 15:28:04 CET 2002
>     root at kuti:/usr/src/sys/compile/TINCA
> Timecounter "i8254"  frequency 1193182 Hz
> CPU: AMD Athlon(tm) Processor (1399.76-MHz 686-class CPU)
>   Origin = "AuthenticAMD"  Id = 0x644  Stepping = 4
>  
> Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,
> CMOV,PA T,PSE36,MMX,FXSR>
>   AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
> real memory  = 268369920 (262080K bytes)
> avail memory = 256303104 (250296K bytes)
> Preloaded elf kernel "kernel" at 0xc04eb000.
> Preloaded elf module "libmchain.ko" at 0xc04eb09c.
> Preloaded elf module "smbfs.ko" at 0xc04eb140.
> netsmb_dev: loaded
> Pentium Pro MTRR support enabled
> md0: Malloc disk
> Using $PIR table, 10 entries at 0xc00f7df0
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pcib0: <Host to PCI bridge> on motherboard
> pci0: <PCI bus> on pcib0
> pcib1: <PCI to PCI bridge (vendor=1106 device=b099)> at device 1.0 on
> pci0 pci1: <PCI bus> on pcib1
> pci1: <ATI Mach64-GM graphics accelerator> at 0.0 irq 11
> xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd800-0xd87f mem
> 0xdfffff80-0xdfff ffff irq 10 at device 7.0 on pci0
> xl0: Ethernet address: 00:04:76:25:79:44
> miibus0: <MII bus> on xl0
> ukphy0: <Generic IEEE 802.3u media interface> on miibus0
> ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> isab0: <PCI to ISA bridge (vendor=1106 device=3074)> at device 17.0 on
> pci0 isa0: <ISA bus> on isab0
> atapci0: <VIA 82C686 ATA100 controller> port 0xff00-0xff0f at device
> 17.1 on pci 0
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: at 0x170 irq 15 on atapci0
> uhci0: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 5 at device
> 17.2 on pc i0
> usb0: <VIA 83C572 USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 5 at device
> 17.3 on pc i0
> usb1: <VIA 83C572 USB controller> on uhci1
> usb1: USB revision 1.0
> uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 5 at device
> 17.4 on pc i0
> usb2: <VIA 83C572 USB controller> on uhci2
> usb2: USB revision 1.0
> uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> pci0: <unknown card> (vendor=0x1106, dev=0x3059) at 17.5 irq 10
> orm0: <Option ROMs> at iomem
> 0xc0000-0xc7fff,0xc8000-0xc87ff,0xc8800-0xcbfff on isa0
> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
> isa0 fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model IntelliMouse, device ID 3
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
> isa0 sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1: configured irq 3 not in bitmap of probed irqs 0
> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
> ppbus0: IEEE1284 device found /NIBBLE
> Probing for PnP devices on ppbus0:
> ppbus0: <Hewlett-Packard HP LaserJet 6L/0101.01> PRINTER HP ENHANCED
> PCL5,PJL plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> ad0: 28629MB <QUANTUM FIREBALLP AS30.0> [58168/16/63] at ata0-master
> UDMA100 acd0: CDROM <LG CD-ROM CRD-8521B> at ata1-master using PIO4
> Mounting root from ufs:/dev/ad0s1a
> 

szia,

pciconf -lv

itt ilyen, es muxik minden gond nelkul:
pcm0 at pci0:31:5: class=0x040100 card=0x4710414c chip=0x24458086 rev=0x11 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801BA/BAM (ICH2) AC'97 Audio Controller'
    class    = multimedia
    subclass = audio

csak pcm-et forgattam kernelbe:
device          pcm

dmesg:
pcm0: <Intel 82801BA (ICH2)> port 0xdc00-0xdc3f,0xd800-0xd8ff irq 12 at device 31.5 on pci0

sndstat:
FreeBSD Audio Driver (newpcm) Jan 29 2002 17:05:44
Installed devices:
pcm0: <Intel 82801BA (ICH2)> at io 0xd800, 0xdc00 irq 12 (1p/2r/0v channels duplex)

fif